HT Instruments HT8100 Process Calibrator/Multimeter

AUD $845.00 • ( AUD $929.50 inc. GST )

Free Delivery on orders over $500
Shipping time may vary for certain products*

  • Fast Delivery*
  • Technical Support
  • Product Training
  • Calibration Services* 
  • Lowest Price Guaranteed

The HT8100 is a meter performing measurements as TRMS DMM as well as a process calibrator generating 0-20mA and 4-20mA DC current signals. As DMM the instrument carries out AC/DC/AC+DC voltage measurements up to 1000V and AC/DC/AC+DC current measurements up to 1A.

Under the current generation mode you can manually select between 0 to 20mA and 4-20mA as well as automatic ramps on output signal. It is capable of measuring current absorbed by external transducers simulating a current adjustable within the whole measuring range.

The instrument can store measurement results into an internal memory and is designed in compliance with safety standards IEC/EN61010-1 according to CAT III 1000V and CAT IV 600V with double insulation protection.

Similar to the Fluke 787 and Fluke 789.

    HT8100 Data Sheet
    HT8100 User Manual

The HT Instruments HT8100 is a professional meter performing measurements as TRMS DMM as well as process calibrator generating 0-20mA and 4-20mA DC current signals.

As a DMM, the HT9100 carries out AC/DC/AC+DC voltage measurements up to 1000V and AC/DC/AC+DC current measurements up to 1A.

Under the current generation mode you can manually select between 0-20mA and 4-20mA as well as automatic ramps on output signal. It is capable of measuring the current absorbed by external transducers simulating a current adjustable within the whole measuring range.

The HT9100 can store measurement results into an internal memory and is designed in compliance with safety standards IEC/EN61010-1 according to CAT III 1000V and CAT IV 600V with double insulation protection. Each function can be selected through corresponding keys. This instrument is typically used in the automation field.

HT Instruments HT8100 Features:

  • DC/AC TRMS Voltage.
  • DC/AC TRMS Current.
  • AC+DC Measurements.
  • Generation of output current signal up to 24mA DC.
  • Selection 0-20mA and 4-20mA output.
  • Up to 4 available automatic ramp.
  • Loop current measurement of external transducers.
  • 250 Ohm HART feature.
  • Simulating of external transducers.
  • Resistance and continuity test.
  • Diode Test.
  • Frequency, Data Hold, Min/Max/AVG.
  • Manual/Autorange.
  • Relative measurements.
  • Internal memory.
  • Autotest for automatic detection of AC or DC parameters.
  • Auto backlight.
  • Auto Power Off.
  • Safety: IEC/EN61010-1, EN61010-2-030 category: CAT IV 600V – CAT III 1000V
  • Similar to the Fluke 787 and Fluke 789.

Included Accessories

  • Protective rubber holster.
  • Test leads (red and black).

Yaamk0000ht0

  • Belt with Magnetic end.

Magnetic Hanger

  • Alligator clips

Yaamk0001ht0

  • Batteries.
  • User manual.

HT 9100 Specifications

Specifications
DC Voltage range 50.000mV – 1000.0V
AC TRMS Voltage range 50.000mV – 1000.0V
DC Current range 50.000mA – 1.0000A
AC TRMS Current range 50.000mA – 1.0000A
Resistance range 500.00Ω – 50.000MΩ
Continuity test range 500.0Ω
Diode Test range 2.000V
Frequency AC Voltage/Current range 500.00Hz – 100.00kHz
Power supply 4 x 1.5V alkaline batteries type AA IEC LR6
Sizes 207(L)x95(W)x52(H) mm
Weight (included batteries) 630g
Weight 1 kg

You may also like…

AUD $1,790.00 • ( AUD $1,969.00 inc. GST )
AUD $1,570.00 • ( AUD $1,727.00 inc. GST )

Need help? Call our support team 1800 358 531