HT Instruments FULLTEST3 Professional Multifunction Safety Tester

FULLTEST 3 is the Most Advanced Solution for a Complete Compliance with the Actual Guidelines

Multifunction Tester for safety of machinery IEC/EN60204-1:2016 and low voltage switchgears and controlgears IEC/EN61439-1-2:2011

IEC/EN60204-1:2016 Measuments:

Power Frequency Dielectric withstand voltage with test voltage of 1000VAC

Testing protection against indirect contact:

• Continuity of protective conductors with test current 200mA
• Automatic disconnection of the supply (RCD, MCB, Fuse)​
• RCD tripping (RCD AC, A, B) up to 1A on TT Systems
• Magneto-thermal protections (MCB curve verificaiton on B, C, D, K) and fuses (gG, aM) on TN Systems

​Insulation resistance measurement with test voltage of 500VDC

Discharging of residual voltage V<60V in 5sec/1sec

IEC/EN61439-1-2:2011 Measurements:

Clearances and Creepage distances:

• Dielectric withstand voltage with test voltage of up to 3400/5100VAC

Continuity of earth system and protective conductors ≥10A

Power Frequency Dielectric withstand voltage with test voltage of 1800VAC

Alternative power-frequency voltage test up to 5100VAC

Test on enclosures of insulating material:

• ​Dielectric Withstand voltage with test voltage up to 2835V

Discharging of residual voltage V<60V in 5sec/1sec

FULLTEST3 is designed to satisfy the requirements of the IEC/EN60204-1:2006 guideline (electrical equipment of industrial machines) and for the new series of prescriptions relative to the IEC/EN61439-1 guideline (Switchgear panels). This last guideline require, among other tests, the Dielectric tests with a test voltage up to 5100V!

FULLTEST3 Features:

• Continuity of protection conductors with 200mA
• Continuity of protection conductors with I>10A, V<12V AC
• Continuity of protection conductors with I>25A, V<12V AC
• Insulation Resistance with 100,250,500,1000VDC test voltage
• Withstanding test with test voltage programmable from 250V to 5100V AC
• Discharging time test on internal capacitance and on power supply plug
• Leakage/absorbed and power on the test socket
• Leakage current with external clamp (HT96U optional accessories)
• Test on RCDs type A, AC, B General, Selective, Delayed up to 1000mA
• Line/Loop impedance and Ipsc calculation
• Line/Loop impedance with high resolution (with IMP57 optional accessories)
• Test on MCB protection with curve B, C, D, K and Fuse type gG and aM
• Selection of length, cable type, insulation of cable, tripping time of protection device
• Global earth resistance without RCD tripping
• Phase sequence indication
• TFT display with touch-screen
• Programmable timer on tests
• Programmable thresholds on measurement
• Internal memory
• USB interface for PC connection
• USB interface for keyboard, printer and barcode reader connection

Test to Guidelines:

Standard Accessories:

• Australian Power cord
• Test cable red, 3 metre, 2 pcs
• Test cable blue, 3 metre
• Test cable green, 3 metre
• C2033X : Cable 3 wires with Shuko plug
• Cable with 5kV safety, 2 pcs
• Test lead CAT III, 3 pcs
• Test lead CAT II, 3 pcs
• Alligator clip, 3pcs
• TOPVIEW2007 : Windows software + USB cable C2007
• Carry bag for accessories
• ISO9000 calibration certificate

Optional Accessories:

• IMP57 : Accessory for high resolution Loop/Line Impedance
• HT96U : Rigid clamp 1-100-1000A AC, diameter 54mm