Clearance
HT Instruments JUPITER Multifunction Multimeter
$650.00 .( $715.00 inc. GST )
For all your equipment calibration needs, visit our MyCalibration website.
Free Delivery on orders over $1000
Shipping time may vary for certain products*
Product Enquiry
If you would like more information regarding this product, simply email us here.
JUPITER THE MULTIFUNCTION MULTIMETER FOR ELECTRICAL INSTALLATION SAFETY TESTING
HT Instruments revolutionises the portable instrument market by introducing the new JUPITER.
The first multimeter who incorporates the functions available only in standard electrical safety testers and professional High-end multimeters.
- Test tripping time of RCDs type A and AC up to 300mA*.
- Tripping current of RCDs type AC up to 30mA.
- Non-trip earth ground resistance.
- Line-to-Neutral, Line-to-Line and Line-to-Ground impedance (resolution 0.1Ohm) with prospective short-circuit/fault current calculation.
- Current up to 3000A by means of clamp-on or flexible external transducer. ›
- Dynamic inrush current of motors and loads through the DIRC function allowing time base selection. ›
- Leakage current by means of the clamp-on transducer HT96U.
- Voltage and current harmonics with THD% calculation and function to the 25th Harmonic (Higher Harmonic Ordering) showing highest harmonic values first.
- One-lead phase sequence detection
- JUPITER is provided with ISO9000 calibration certificate as standard.
HT Jupiter Datasheet
HT Jupiter Brochure
HT Jupiter User Manual
As professional multimeter HT Instruments JUPITER Multifunction Multimeter provides:
Autorange measurements with automatic AC/DC detection
LoZ low impedance voltage input to eliminate ghost voltage readings (caused by the capacitive coupling among active conductors close each other)
One-lead phase sequence detection
JUPITER is provided with ISO9000 calibration certificate as standard.
HT Instruments JUPITER Multifunction Multimeter Features:
- Autorange measurements with automatic AC/DC detection.
- DC, AC TRMS, AC+DC TRMS voltage up to 690V.
- Tripping time of RCDs type A and AC up to 300mA*.
- Tripping current of RCDs type AC up to 30mA. ›
- Non-trip earth ground resistance. ›
- Line-to-Neutral, Line-to-Line and Line-to-Ground impedance (resolution 0.1Ohm) with prospective short-circuit/fault current calculation.
- Current up to 3000A by means of clamp-on or flexible external transducer.
- Dynamic inrush current of motors and loads through the DIRC function allowing time base selection.
- Leakage current by means of the clamp-on transducer HT96U.
- Voltage and current harmonics with THD% calculation and function to the 25th Harmonic showing highest harmonic values first.
- One-lead phase sequence detection.
- Low impedance voltage input to eliminate ghost voltage readings.
- DC, AC TRMS, AC+DC TRMS current by means of external transducer.
- Frequency of voltage and/or current.
- Resistance and continuity with buzzer.
- MIN/MAX/PEAK/HOLD functions.
- 6000 count Display
HT Instruments JUPITER Multifunction Multimeter Functions:
| TRMS | |
| AC/DC voltage | 690V / AC+DC |
| LoZ Input | |
| AC/DC current | AC+DC with external clamp transducer |
| Frequency | |
| Resistance and continuity test with buzzer | |
| RCD tripping time | 30mA, 100mA, 300mA A/AC |
| RCD trip current measurement | RCD A/AC 30mA |
| Leakage current (with optional accessory HT96U) | |
| Non-trip earth resistance | |
| Voltage and current harmonics up to the 25th and THD% | |
| Loop impedance P-N, P-P, P-PE and calculation of prospective short-circuit current | |
| Electric motor starting current (INRUSH) | |
| Auto x1/2, x1, x2, x5, 0°, 180° | |
| Phase sequence | |
| Out come OK/NOT OK | According with IEC60364-6 |
| Backlit LCD display | |
| Measurement category | CAT IV 600V |
| Measuring counts | 6000 |
| MAX/MIN/HOLD | |
| Bargraph |
HT Instruments JUPITER Standard Accessories:
• 4324-2 Pair of test tips Red/Black 2/4mm straight banana
• YABAT0001HT0 Alkaline battery 1.5V, type AAA, IEC LR03, 4 pcs
• YABRS0002HT0 Carrying bag
• YAMUM0066HT0 User manual on CD-ROM
• YAMUM0065HT0 Quick reference guide
• Calibration certificate ISO9000.[/col]
• F3000U AC flexible clamp with 30/300/3000A full scales
• HT96U* AC current clamp with 1/100/1000A full scales
• HT97U* AC current clamp with 10/100/1000A AC full scales
• HT98U* DC current clamp with 1000A full scale
• HT4006 AC/DC current clamp with 40/400A full scales
• NOCANBA Hypertac-to-banana adapter* Adapter NOCANBA required.
| Weight | 600 kg |
|---|
Be the first to review “HT Instruments JUPITER Multifunction Multimeter”
You must be logged in to post a review.
$800 and above
$800 and above
$800 and above Related Products
Next day delivery
Finance services
Price Match
Technical support
Product training
Calibration servises
Need help? Call our support team 1800 358 531
Reviews
There are no reviews yet.