Clearance
HT Instruments NEPTUNE Multimeter/Insulation Tester
$650.00 .( $715.00 inc. GST )
- 🎉 Save more when you spend more
- 5% off over $2000 + GST
- 10% off over $5000 + GST
*until 31st Dec 2025!
For all your equipment calibration needs, visit our MyCalibration website.
Free Delivery on orders over $1000
Shipping time may vary for certain products*
Product Enquiry
If you would like more information regarding this product, simply email us here.
HT Instruments NEPTUNE Features:
- Autorange function & automatic detection of AC, DC for all measurements.
- Insulation test voltages of 50,100,250,500,1000VDC
- DC, AC TRMS, AC+DC TRMS voltage up to 1000V.
- Low-impedance LoZ input to eliminate “stray voltages” from the measurement
- DC, AC TRMS, AC+DC TRMS current by means of an optional external current clamp
- Measurement of voltage or current frequency.
- Resistance and continuity with buzzer.
- MAX/MIN/PEAK/HOLD functions.
- CAT IV 600V, CAT III 1000V Safety Rating
- ISO 9000 Calibration Certificate included
- Similar to the Fluke 1587 & Fluke 1577
The HT Instruments NEPTUNE Multimeter/Insulation Tester is a mix of technology that includes an instrument for electrical safety testing (insulation up to 1000V and continuity with 200mA), an Harmonics analyzer and a True RMS multimeter.
HT Instruments NEPTUNE Key Features:
- it can quickly measure insulation up to 1000V, just like top-of-the-range testers.
- 50,100,250,500,1000VDC Insulation test voltages.
- it measures continuity of protective conductors with 200mA to solve the most common problems related to masses.
- measure Inrush currents, Harmonics and THD%, just like top-of-the-range power quality analyzers.
- with a wide range of external clamp transducers it can measure AC TRMS, DC, AC+DC current and Inrush current, starting from 1mA up to 3000A.
- compare each measurement with the limits prescribed by the Guidelines and I provide a clear result OK or NOT OK
- it’s a multimeter with functions only available if using top-of-the-range instruments.
- CAT IV 600V, CAT III 1000V Safety Rating
- Similar to the Fluke 1587 & Fluke 1577
- ISO 9000 CALIBRATION CERTIFICATE INCLUDED
HT Instruments NEPTUNE Technical Specifications |
|
| DC voltage | |
| Measuring range | 0.0V ÷ 999.9V |
| Resolution | 0.1V |
| Accuracy | ±(0.5%reading + 2digits) |
| AC TRMS, DC, AC+DC TRMS, LoZ voltage | |
| Measuring range | 0.5V ÷ 999.9V |
| Resolution | 0.1V |
| Frequency range | 32Hz ÷ 1kHz |
| Accuracy | ±(0.5%reading + 2digits) |
| AC TRMS current with flexible clamp F3000U | |
| Measuring range | 1A ÷ 3000A |
| Basic resolution | 0.01A |
| Accuracy | ±(0.5%reading + 2digits) |
| AC TRMS, DC, AC+DC TRMS current with standard clamp | |
| Measuring range | 1mV ÷ 1000mV |
| Resolution | 1mV |
| Accuracy | ±(0.5%reading + 2digits) |
| Inrush current (DIRC) – Flexible clamp F3000U | |
| Measuring range | 1A ÷ 3000A |
| Basic resolution | 0.01A |
| Frequency range | 42.5Hz ÷ 69Hz |
| Accuracy | ±(2.0%reading + 2digits) |
| Response time of peak | 1ms |
| Max RMS response time | 16.6ms, 20ms, 50ms, 100ms, 150ms, 175ms, 200ms |
| Inrush current (DIRC) – Standard clamp | |
| Measuring range | 1mV ÷ 1000mV |
| Resolution | 1mV |
| Frequency range | 42.5Hz ÷ 69Hz |
| Accuracy | ±(2.0%reading + 2digits) |
| Response time of peak | 1ms |
| Max RMS response time | 16.6ms, 20ms, 50ms, 100ms, 150ms, 175ms, 200ms |
| Resistance and Continuity test | |
| Measuring range | 0.0Ω ÷ 1999Ω |
| Basic resolution | 0.1Ω |
| Accuracy | ±(1.0%reading + 5digits) |
| Buzzer test | R<30Ω |
| Voltage / Current harmonics | |
| Harmonic order | DC, 1st ÷ 25th + THD% |
| Frequency range | 42.5Hz ÷ 69Hz |
| Resolution | 0.1V / 0.1A |
| Basic accuracy | ±(5.0%rdg + 10digits) |
| Phase sequence with 1 terminal | |
| Measuring range | 100V ÷ 999.9V |
| Frequency range | 42.5Hz ÷ 69Hz |
| Insulation resistance | |
| Test voltages | 50,100,250,500,1000VDC |
| Measuring range (@ 500V) | 0.01MΩ ÷ 999MΩ |
| Resolution | 0.01MΩ ÷ 1MΩ |
| Basic accuracy (@ 500V) | ±(2.0%reading + 2digits) |
| Timer for measurements | 15s, 30s, 1min, 5min, 10min |
| Continuity of protective conductors | |
| Test current | >200mA DC (@ R<5Ω) |
| Measuring range | 0.00Ω ÷ 199.9Ω |
| Open-circuit voltage | 4 < Vo < 12V DC |
| Accuracy | ±(2.0%reading + 2digits) |
| General characteristics | |
| Instrument safety | IEC/EN61010-1, IEC/EN61010-2-030, IEC/EN61010-2-033 |
| EMC | IEC/EN 61326-1 |
| Test MΩ | CEI 64-8, IEC/EN61557-2 |
| Test LoΩ | CEI 64-8, IEC/EN61557-4 |
| Phase sequence | IEC/EN 61557-7 |
| Insulation | double insulation |
| Pollution level | 2 |
| Measurement category | CAT IV 600V, CAT III 1000V to earth and between inputs |
| Mechanical characteristics | |
| Size (L x W x H) | 175 x 85 x 55mm |
| Weight (batteries included) | 420g |
| Mechanical protection | IP40 |
| Power supply | |
| Battery type | 4×1.5V batteries type AAA IEC LR03 |
| Auto power off | after 15 minutes’ idling |
| Display | |
| Type of display | 4 dgt LCD, max 9999 dots, decimal sign, point, backlight and bargraph, indication of polarity |
| Updating frequency | 2 times/s |
HT Instruments NEPTUNE Included Accessories:
• 4324-2 Pair of Red/Black banana connectors with 2/4mm tip
• YAAMK0001HT0 Pair of Red/Black alligator clips
• YABAT0001HT0 Alkaline battery type AAA IEC LR03 1.5V, 4 pieces
• YABRS0002HT0 Carrying bag
• YAMUM0068HT0 User manual on CD-ROM
• YAMUM0067HT0 Quick user guide
• Calibration certificate ISO9000
Optional Accessories:
• F3000U Flexible clamp with full scale 30/300/3000A AC and banana connectors
• HT96U* Standard clamp with full scale 1/100/1000A AC and Hypertac connector
• HT97U* Standard clamp with full scale 10/100/1000A AC and Hypertac connector
• HT98U* Standard clamp with full scale 1000A DC and Hypertac connector
• HT4006 Standard clamp with full scale 40/400A AC/DC and banana connectors
• NOCANBA Adapter for clamp connection with Hypertac connector
• 5004-IECR Red alligator clip
• 5004-IECN Black alligator clip
• C2065 3-wire cable Red, Black and Green with Schuko plug
$800 and above
Multimeter Related Products
Next day delivery
Finance services
Price Match
Technical support
Product training
Calibration servises
Need help? Call our support team 1800 358 531
