Owned and Operated by Australia's leading Test and Measurement Distributor
TEL: 1800-FLUKE-1 — 1800 358 531
$1,995.00 .( $2,194.50 inc. GST )
For all your equipment calibration needs, visit our MyCalibration website.
Free Delivery on orders over $1000
Shipping time may vary for certain products*
If you would like more information regarding this product, simply email us here.
The Yokogawa CA330 RTD simulate model corresponds to 14 types of RTD for sourcing. It achieves the high basic accuracy of 0.3°C (typical of type PT100), twice better than the previous model which enables it to operate a high reliable test. CA330 can measure the output of RTD like a thermometer.
The Yokogawa CA330 is a high RTD portable handheld calibrator used to inspect and maintain the accuracy of control devices such as temperature controllers, temperature transmitters, temperature sensors and other process devices which are used in process plants, industry machinery, and manufacturing.
The Yokogawa CA330 is a dedicated process calibrator which is capable of performing inspections and calibrations of RTDs. With a high accuracy of ±0.3℃ which is top class as a handy type to source resistance output and measure output of sensors. It not only corresponds to JIS standard and IEC standard thermocouples, but corresponds to GOST-R standard also. It corresponds to inspection and calibration with the summary of 14 types of RTD following the standards.
Yokogawa CA330 General Specifications: | |
Display: | Segment LCD |
Backlight: | LED (Selection of “Constantly ON”, “Constantly OFF” or “Auto off by approx. 2min”) |
Battery life: | 50 hours (5V source, load over 10kOhm), 25 hours (20mA source, load under 5V) |
Automatic Power-off: | Approximately 20 minutes (Can be disabled by setting) |
Display Refresh Rate: | Approx 1 sec. |
Level Setting Response of generator: |
Approximately 1 second (from when the output begins to change until when the output level falls within the specified accuracy) |
Dimensions: | Approximately Approx. 90 (W)×192 (H)×42 (D) |
Weight: | Approximately 440 g |
Operating temperature/humidity: | -10 to 55°C and 20 to 80%RH (no condensation) |
Storage temperature: | -20 to 60°C and 90%RH or less (no condensation |
Weight | 1 kg |
---|
You must be logged in to post a review.
Process Calibration
Process Calibration
Advanced Calibration - $100
Process Calibration
Need help? Call our support team 1800 358 531
Reviews
There are no reviews yet