As professional multimeter HT Instruments JUPITER Multifunction Multimeter provides:
Autorange measurements with automatic AC/DC detection
LoZ low impedance voltage input to eliminate ghost voltage readings (caused by the capacitive coupling among active conductors close each other)
One-lead phase sequence detection
JUPITER is provided with ISO9000 calibration certificate as standard.
HT Instruments JUPITER Multifunction Multimeter Features:
- Autorange measurements with automatic AC/DC detection.
- DC, AC TRMS, AC+DC TRMS voltage up to 690V.
- Tripping time of RCDs type A and AC up to 300mA*.
- Tripping current of RCDs type AC up to 30mA. ›
- Non-trip earth ground resistance. ›
- Line-to-Neutral, Line-to-Line and Line-to-Ground impedance (resolution 0.1Ohm) with prospective short-circuit/fault current calculation.
- Current up to 3000A by means of clamp-on or flexible external transducer.
- Dynamic inrush current of motors and loads through the DIRC function allowing time base selection.
- Leakage current by means of the clamp-on transducer HT96U.
- Voltage and current harmonics with THD% calculation and function to the 25th Harmonic showing highest harmonic values first.
- One-lead phase sequence detection.
- Low impedance voltage input to eliminate ghost voltage readings.
- DC, AC TRMS, AC+DC TRMS current by means of external transducer.
- Frequency of voltage and/or current.
- Resistance and continuity with buzzer.
- MIN/MAX/PEAK/HOLD functions.
- 6000 count Display
HT Instruments JUPITER Multifunction Multimeter Functions:
|AC/DC voltage||690V / AC+DC|
|AC/DC current||AC+DC with external clamp transducer|
|Resistance and continuity test with buzzer|
|RCD tripping time||30mA, 100mA, 300mA A/AC|
|RCD trip current measurement||RCD A/AC 30mA|
|Leakage current (with optional accessory HT96U)|
|Non-trip earth resistance|
|Voltage and current harmonics up to the 25th and THD%|
|Loop impedance P-N, P-P, P-PE and calculation of prospective short-circuit current|
|Electric motor starting current (INRUSH)|
|Auto x1/2, x1, x2, x5, 0°, 180°|
|Out come OK/NOT OK||According with IEC60364-6|
|Backlit LCD display|
|Measurement category||CAT IV 600V|
HT Instruments JUPITER Standard Accessories:
• 4324-2 Pair of test tips Red/Black 2/4mm straight banana
• YABAT0001HT0 Alkaline battery 1.5V, type AAA, IEC LR03, 4 pcs
• YABRS0002HT0 Carrying bag
• YAMUM0066HT0 User manual on CD-ROM
• YAMUM0065HT0 Quick reference guide
• Calibration certificate ISO9000.[/col]
• F3000U AC flexible clamp with 30/300/3000A full scales
• HT96U* AC current clamp with 1/100/1000A full scales
• HT97U* AC current clamp with 10/100/1000A AC full scales
• HT98U* DC current clamp with 1000A full scale
• HT4006 AC/DC current clamp with 40/400A full scales
• NOCANBA Hypertac-to-banana adapter* Adapter NOCANBA required.