Owned and Operated by Australia's leading Test and Measurement Distributor
TEL: 1800-FLUKE-1 — 1800 358 531
Original price was: $2,900.00.$2,500.00Current price is: $2,500.00. .( $2,750.00 inc. GST )
For all your equipment calibration needs, visit our MyCalibration website.
Free Delivery on orders over $1000
Shipping time may vary for certain products*
If you would like more information regarding this product, simply email us here.
The HT Instruments COMBI521EV is a professional-grade electric car charging station (EVSE) safety tester that meets the requirements of IEC / EN 61851-1 and IEC / EN60364-7-722. This combined verification instrument also tests electric systems in compliance with IEC/EN 61557-1, making it an ideal choice for businesses and professionals who need to verify the safety of EVSEs and electric systems.
The HT Instruments COMBI521EV is a professional-grade electric car charging station (EVSE) safety tester that meets the requirements of IEC / EN 61851-1 and IEC / EN60364-7-722. This combined verification instrument also tests electric systems in compliance with IEC/EN 61557-1, making it an ideal choice for businesses and professionals who need to verify the safety of EVSEs and electric systems.
The HT Instruments COMBI521EV is a portable multifunctional electrical tester that can be used for a variety of electrical measurements, including continuity of the protection cable, insulation resistance (with calculation of PI and DAR), overall earth resistance, RCDs type B, A and AC tripping time and current, line / fault impedance with calculation of prospective short circuit / fault current, phase sequence and conformity.
The COMBI521EV is a device that not only allows you to measure environmental parameters like illuminance and temperature, but also leakage current and electric quantities such as voltage, current, power factor, power and harmonics on single-phase systems.
The COMBI521EV provides an innovative AUTO function that allows for easy testing of overall earth resistance, RCD tripping time, and insulation resistance. Simply set the value of RCD current and select the AUTO function to start the test. The device will automatically carry out the tests in sequence, and display all results at the end with simple OK or NOT OK symbols. This makes it easy to determine compliance with standards.
Thanks to its internal memory that allows saving the measures and subsequently transfer them onto the PC through the optical/USB connection. The brand new HTAnalysis App, downloadable for free on iOS and Android systems, enhances COMBI521EV’s capabilities by transferring measured and recorded data onto tablets and smartphones; this way, the operator can customize and share the results of their tests on HTCloud. COMBI521EV is a valuable ally for every technician thanks to its precision, convenience and wide range of applications.
Weight | 2 kg |
---|
Sequence of tests for the verification of electric columns | EV-TEST100 |
TRMS | (1) |
Insulation with voltage 50, 100, 250, 500, 1000VDC | 1.200 |
Continuity of protective conductors with 200mA | 225 x 165 x 75mm |
Tripping time and current of RCDs type B, A, AC Standard, Selective and Delayed up to 1A | 25ª |
Non-trip earth resistance | CAT IV 300V |
Loop/Line impedance, Phase-Phase, Phase-Neutral, Phase-PE | With optional accessory IMP57 |
Loop/Line impedance Phase-Phase, Phase-Neutral, Phase-PE with high resolution (0.1mΩ) | With optional accessory IMP57 |
Measurement of percentage voltage drop on the line | PR400 |
AUTO test (Non-trip ground resistance, RCD, Insulation) in sequence | |
Contact voltage | |
Phase sequence | |
Leakage current with optional clamp meter | |
Measurement of Voltage, Current, Active, Reactive, Apparent Power | (1) |
Measurement of Cosphi, Power Factor | (1) |
Voltage and current harmonics up to the 25th and THD% | 25ª |
Protection category | CAT IV 300V |
Measurement of environmental parameters (°C,°F, %RH, Lux) | |
Test with remote lead | PR400 |
Help on line on the display | |
Internal memory for measured data saving | |
Optical/USB serial port for PC connection | |
Integrated WiFi connection and compatibility with HTANALYSIS App | |
Size (LxWx H) (mm) | 225 x 165 x 75mm |
Weight in grams (batteries included) | 1.200 |
You must be logged in to post a review.
Need help? Call our support team 1800 358 531
Reviews
There are no reviews yet