Extech EC400 Exstik Conductivity Meter.
ExStik II Conductivity/TDS/Salinity/Temperature Kit
The Extech EC400 ExStik features six units of measure (µS/cm, mS/cm, ppm, ppt, mg/L, and g/L), internal memory that stores up to 15 labeled readings for easy recall, adjustable conductivity to TDS ratio factor from 0.4 to 1.0, 0.5 fixed salinity ratio, and self-calibration upon power up.
Incorporating the latest microprocessor chip and patented sensor technologies to enable the simultaneous measurement of Conductivity, TDS, Salinity, and Temperature, the EC400 provides the flexibility of interchangeable cell constants and has made the job of testing fast, accurate, and repeatable. The EC400 is also waterproof to IP57 for use in wet environments and floats if dropped in liquid.
- Wastewater and drinking water analysis
- Environmental tests to determine the health of ponds, streams, wells, and other bodies of water
- Manufacturing processes such as component or PCB rinsing
|Display||2000 count LCD with Bargraph|
|Conductivity range||0 to 199.9μS, 200 to 1999μS, 200 to 19.99mS|
|TDS range||0 to 99.9ppm or mg/L, 100 to 999ppm or mg/L, 1.00 to 9.99ppt or g/L|
|Salinity range||0 to 99.9ppm, , 100 to 999ppm, 1.00 to 9.99ppt|
|TDS Ratio||0.4 to 1.0 adjustable|
|Temperature range||0.0 to 65.0°C|
|Accuracy Conductivity||±2% fs|
|Automatic Temp Compensation||2% per °F|
|Measurement storage||15 readings|
|Low battery indication||‘BAT’ appears on the LCD|
|Power||Four SR-44W button batteries|
|Auto power off||After 10 minutes of no button presses|
|Operating conditions||0 to 50°C|
|Dimensions||36 x 173 x 41mm|