REED R5001 LCR Meter

AUD $395.00 • ( AUD $434.50 inc. GST )

Free Delivery on orders over $500
Shipping time may vary for certain products*

  • Fast Delivery*
  • Technical Support
  • Product Training
  • Calibration Services*
  • Lowest Price Guaranteed
Click here to Make an Enquiry

Product Enquiry

If you would like more information regarding this product, simply email us here.
  • Drop files here or
    Accepted file types: jpg, gif, png, pdf, Max. file size: 1 MB, Max. files: 4.
    • This field is for validation purposes and should be left unchanged.

    mm_logo_04

    Autoranging LCR Meter with Data Hold.

    Measure inductance/capacitance/resistance with secondary parameters including dissipation factor.

    Authorised Australian Distributor

     

    SKU: Reed R5001 Categories: , Tag:

    Features

    • Measure inductance/capacitance/resistance with secondary parameters including dissipation factor (D), quality factor (Q),
      phase angle (Ø), equivalent series/parallel resistance (ESR or Rp).
    • Autoranging operation for AC impedance and DE resistance measurement.
    • Series/Parallel measurement modes.
    • Ls/Lp/Cp with D/Q/Ø/ESR parameters.
    • Support DCR mode 200Ω to 200MΩ.
    • High accuracy with 4 or 5 terminal Kelvin measurement.
    • Testing frequency up to 10kHz and output frequency to 100kHz.
    • Dual display with backlight.
    • Data Hold function.
    • Low battery indication with auto power off.
    • Dust and water proof to IP67.
    • Includes test leads, batteries and carrying case
    Weight .5 kg

    How to Use

    How to use Reed Data hold LCR meter (R5001)

    Buy this Reed R5001 autoranging LCR meter

    Test Frequency Functions
    When measuring capacitance, commonly a 1kHz test frequency is used to measure capacitors that are 0.01μF or smaller. For capacitors that are 10μF or larger, a lower frequency of 120Hz is used. Based on this settings, a high-test frequencies are best for testing very low capacitance components. For large capacitance components, low frequency would be optimal.

    When you use this instrument for measuring inductance inductors below 2 mH should be measured at 1kHz frequency while inductors above 200H should be measured at 120Hz.

    Test Frequency Select
    The test frequency can affect the accuracy of the results depending on what frequency is selected and what type and value of a component is being measured or tested. The meter has five test frequencies: 100Hz/120Hz/1kHz/10kHz/100kHz. To set the “Test Frequency”press the Frequency Button to scroll through the five frequencies sequentially.

    Primary Impedance with Secondary Parameter Test
    “Auto-LCR Mode”, will check the type of impedance and automatically. To switch from “Auto-LCR” Mode to “Auto-“L Mode, “Auto-C” Mode, “Auto-R” Mode, and “DCR” Mode, Press the Function Button. When Auto-L or Auto-C Mode are selected, the impedance measurement is auto ranging. The Reed R5001’s primary LCD display will show the inductance or capacitance of DUT (device under test); the secondary LCD display will show the quality or dissipation factor. Press the Secondary Display/Left Button to display the D/Q/ θ/ESR value. When Auto-R (ACR mode) or DCR mode is selected the secondary parameter is omitted.

    Series or Parallel Functions
    Most capacitance measurements will obtain best results with parallel mode selected. Most inductance measurements will obtain best results with series mode selected.

    Series/Parallel Measurements
    When any L/C/R function is selected, the default measurement will be automatically selected. If the impedance is greater than 10kΩ, the meter will select the parallel mode and “Lp/Cp/Rp” icon will be displayed on the LCD screen. The meter will automatically select the “series mode” in case of 10kΩ less impedance. “Ls/ Cs/Rs” icon will display on the LCD. You can set the impedance measurement in series mode or in parallel mode sequentially by pressing the Parallel/Series/Right Button.

    Data Hold
    Press the Hold Button to activate data hold function and “freeze” the current measurement on the display. Press the Hold Button again to deactivate it.

    Relative mode
    This function able you to reserve the current DUT readings (DCUR) on the primary display as a reference value (DREF). To activate this, press the Relative/Down Button. The secondary display will show the percentage of the relative value (REL%). Press the Relative/ Down Button again to show the reference value (DREF) on the primary display; The percentage range is -99.9% to 99.9%. When the relative value is larger than double the reference value (DREF), the symbol “OL%” will appear on the secondary display.

    Reviews

    There are no reviews yet.

    Be the first to review “REED R5001 LCR Meter”

    Need help? Call our support team 1800 358 531

    • Place The Order and Earn Points Earn 100 Points on every AUD $10.00 spent
    • Write Review
      Write review and earn 300 Point
    • image
      Apply Points on Cart Total

      Conversion Rule: AUD $10.00 = 500 Point

    Check your point total now Check your point total now