HT Italia HT9015 AC/DC True RMS Clamp Meter CAT IV 1000V

Name: HT Italia HT9015 AC/DC True RMS Clamp Meter CAT IV 1000V
Brand: AC/DC Clamps
SKU: HT9015
Availability: InStock

$230.00 .( $253.00 inc. GST )

For all your equipment calibration needs, visit our MyCalibration website.

Free Delivery on orders over $1000
Shipping time may vary for certain products*

Click here to Make an Enquiry

Product Enquiry

If you would like more information regarding this product, simply email us here.

The HT9015 is a 600A AC & DC clamp meter which has a large LCD 4 digit display (6000 counts), with backlight and bargraph to more easy reading in critical environments.

Resistance
Continuity test with buzzer
Frequency with jaws and test leads
Capacitance
Diode test
Duty Cycle
Temperature with type K probe
Autorange
Data HOLD
MAX/MIN/ZERO
PEAK CURRENT (<10ms)
Backlight
Bargraph
Auto Power OFF

Authorised Australian Distributor.

SKU: HT9015 Categories: AC/DC Clamps, Cat IV Clamps, HT ITALIA Tag: HT Italia

HT Italia HT9015 AC/DC true rms Clamp meter 600A, 6000 points – CAT IV
HT9015 professional clamp is designed for DC/AC TRMS current measurement up to 600A, and DC/AC voltage for achieve safety CAT IV 1000V according to IEC/EN61010-1 safety standard.

The HT Italia HT9015 has a large LCD 4 digit display (6000 counts), with backlight and bargraph to more easy reading in critical environments. The model perform also resistance, continuity test, frequency, capacitance, diode test, duty cycle and temperature with type K probe measurements. The AutopowerOFF feature is also available for the meter in order to preserve it’s internal battery charge.

HT Italia HT 9015 Functions:

TRMS measurement
DC/AC current up to 600A
DC/AC voltage up to 1000V
“Voltsense” feature for AC voltage detection
Resistance
Continuity test with buzzer
Frequency with jaws and test leads
Capacitance
Diode test
Duty Cycle
Temperature with type K probe
Autorange
Data HOLD
MAX/MIN/ZERO
PEAK CURRENT (<10ms)
Backlight
Bargraph
Auto Power OFF

Instruments HT9015 Technical Specifications
Accuracy is calculated as [% rdg + (number of dgt) x resolution]. It is referred to the following reference conditions: 18°C ÷ 28°C (65°F ÷ 83°F) with RH < 75%
ELECTRICAL SPECIFICATIONS
DC Voltage (Autorange)	600.0mV – 1000V
AC Voltage TRMS (Autorange)	6.000V – 1000V
Resistance and Continuity test (Autorange)	600.0Ω – 60.00MΩ
DC Current	60.00A – 600.0A
AC TRMS Current	60.00A – 600.0A
Capacitance (Autorange)	40.00nF – 4000µF
Frequency with test leads (Autorange)	99.99Hz – 60.00kHz
Frequency with jaws (Autorange)	99.99Hz – 9.999kHz

GENERAL SPECIFICATIONS
Mechanical characteristics
Dimensions (L x W x H)	215 x 74 x 43mm ; 8 x 3 x 2 in
Weight (including battery)	285g (10 ounces)
Max conductor size	30mm (1in)
Supply
Battery type	1 battery 9V NEDA 1604 IEC 6F22 JIS 006P
Battery life	about 200 hours.
Auto power OFF	after 15 minutes of idleness (not disabled)
Display
Characteristics	4 LCD (max 6000 counts), decimal point, unit symbol indication, bargraph and backlight
Sample rate	2 times/sec
Conversion mode	TRMS
Climatic conditions
Reference temperature	18°C ÷ 28°C (65°F ÷ 83°F)
Operating temperature	5 ÷ 40 °C (41°F ÷ 104°F)
Operating humidity	<80%RH
Storage temperature	-20 ÷ 60 °C (-4°F ÷ 140°F)
Storage humidity	<80%RH
Reference Standards
Comply with	IEC/EN 61010-1
Insulation	double insulation
Pollution	Level 2
For inside use, max height	2000m
Installation category	CAT IV 600V, CAT III 1000V to ground