HIKMICRO HM-P201-MACRO macro lens

HIKMICRO HM-P201-MACRO Thermal Camera Macro Lens – Precision PCB Inspection & Electronics Testing

The Challenge: Spotting Thermal Issues on Tiny Components

Electronics professionals face a constant problem: identifying overheating components, thermal runaway, or design flaws on densely packed circuit boards where individual components can be smaller than a grain of rice. Standard thermal cameras can’t get close enough to isolate the problem—you end up with fuzzy thermal images that show “something’s hot over there” without pinpointing the exact culprit.

Whether you’re troubleshooting prototype boards, validating new designs, repairing smartphones, or investigating warranty returns, you need to see precise thermal behaviour at component level. Miss the faulty chip by a few millimetres and you’re back to guesswork, wasting time and risking incorrect repairs.

How the HM-P201-MACRO Solves It

The HIKMICRO HM-P201-MACRO macro lens brings genuine close-focus thermal imaging to your existing Pocket-series thermal camera. It allows you to work just 30mm from the target—close enough to capture clear thermal images of individual SMD components, track traces, solder joints, and chip packages.

This isn’t just “zooming in closer.” The macro lens is optically designed for extreme close-up thermography, capturing thermal detail down to 100-micron targets. That means you can see hotspots on tiny resistors, identify voltage regulators running outside spec, or watch thermal dissipation across a processor in real time.

What sets this apart from competitors is the plug-and-play design: clip it onto your compatible HIKMICRO Pocket2 or PocketC camera and you’re measuring immediately. No firmware updates, no factory calibration appointments, no downtime. It’s an instant upgrade to your thermal inspection capability.

Key Benefits & Real-World Advantages

• Micro-Level Thermal Precision
  The lens resolves targets as small as 0.1mm × 0.1mm, allowing you to inspect individual surface-mount components on modern high-density PCBs. This level of detail means you can differentiate between a hot chip and its neighbouring passives, avoiding the false diagnoses that come from low-resolution thermal images.
• Accuracy That Matters for Electronics
  With measurement accuracy of ±3°C (or ±3%, whichever is greater) between 0°C and 150°C, you get reliable temperature data for most electronics applications. That’s tight enough to spot abnormal behaviour in voltage regulators, power management ICs, or any component generating unexpected heat during operation or stress testing.
• Instant Deployment—Zero Calibration Hassle
  Traditional macro lenses for thermal cameras often require sending your device back to the manufacturer for recalibration, locking up your equipment for weeks. The HM-P201-MACRO is factory-calibrated and ready to use the moment you attach it. If you’re fault-finding on a Friday afternoon, you don’t want to wait until next month to get back on the tools.
• Lightweight & Portable
  At just 9 grams, the lens adds virtually no weight to your thermal camera. Toss it in your kit, attach it when you need close-up work, remove it for broader area scans. It’s compact enough (44mm × 25mm × 87mm) to keep as a permanent addition to your test equipment without taking up meaningful space.
• Works Across Tough Environments
  Rated for operation from -20°C to 50°C, the lens handles bench work, field diagnostics, and even temperature-controlled test chambers. Whether you’re in a climate-controlled lab or a factory floor in summer, the lens keeps working.

Applications & Use Cases

• PCB Design Verification & Validation
  During the prototyping phase, use the macro lens to validate that power distribution is even, that components stay within thermal limits under load, and that your thermal management (heatsinks, thermal vias) is doing its job. Catch design flaws before committing to production runs.
• Electronics Fault Diagnosis & Repair
  When a board has failed and you need to find out why, the macro lens shows you which component cooked itself. Ideal for warranty analysis, repair technicians, and service centres working on anything from industrial controllers to consumer electronics.
• Quality Control & Production Testing
  Manufacturers can use macro thermal imaging to spot soldering defects (cold joints show up thermally different under current), verify component placement, and check for counterfeit or substandard parts that exhibit abnormal thermal signatures.
• Mobile Device & Laptop Repair
  Modern smartphones and laptops pack incredible component density into small spaces. The macro lens helps repair technicians identify failing ICs, short circuits, or damaged power delivery sections without invasive disassembly or risky probing.
• Research & Development Labs
  Engineers developing new power electronics, semiconductor devices, or thermal management solutions benefit from observing real-time thermal performance at the component level. Use the macro lens to iterate faster and validate thermal models against actual behaviour.

TECHNICAL SPECIFICATIONS

WHY CHOOSE TESTGEAR FOR YOUR THERMAL INSPECTION EQUIPMENT

Aussie Stock, Fast Dispatch
We hold HIKMICRO thermal imaging gear here in Australia. That means no international shipping delays or surprise customs charges—just fast delivery to your workshop or lab so you can get on with the job.

Expert Guidance
Not sure if this macro lens suits your application? Our team understands thermal imaging for electronics and can help you choose the right setup. Whether you’re setting up a PCB rework station or building out a product development lab, we’ll make sure you get gear that works.

Calibration & Support Services
Beyond selling equipment, we back you up with calibration services and technical support. If your thermal camera needs recalibration down the track, we’ve got you sorted—keeping your measurements accurate and your compliance documented.

Trusted by Australian Trade Professionals
Electrical contractors, calibration labs, and industrial technicians across Australia rely on TestGear for dependable test equipment. We focus on tools that perform in real-world conditions, not just on spec sheets.

FREQUENTLY ASKED QUESTIONS

Q: Will this macro lens work with my existing HIKMICRO thermal camera?
A: The HM-P201-MACRO is compatible with HIKMICRO Pocket2 and PocketC models. It will not work with other thermal camera brands or models outside the Pocket series. Double-check your camera model before ordering.

Q: Do I need to send my camera away for calibration after attaching the lens?
A: No. The macro lens is factory-calibrated and ready to use immediately. Just clip it on and start measuring—no downtime, no calibration certificates to wait for.

Q: How close do I need to be to the PCB for accurate imaging?
A: The optimal focus distance is 30mm (±1mm), so you’ll be working about 3cm from the board. Any closer or further and the image may lose sharpness.

Q: Can I measure temperatures on targets smaller than 0.5mm × 0.5mm?
A: You can image targets as small as 0.1mm × 0.1mm, but accurate temperature measurement requires a minimum target size of 0.5mm × 0.5mm. Smaller than that and you’ll see it thermally, but the temperature reading may not be reliable.

Q: Is the macro lens suitable for outdoor electrical work or just lab use?
A: While it’s designed primarily for close-up electronics inspection (PCBs, components, device repair), it will function in any environment within its operating range (-20°C to 50°C). However, it’s most effective on stationary, small-scale targets rather than large electrical installations.

GET STARTED WITH PRECISION THERMAL IMAGING

The HIKMICRO HM-P201-MACRO macro lens upgrades your thermal camera into a precision electronics diagnostic tool. Whether you’re validating new designs, hunting down PCB faults, or improving quality control, this lens gives you the clarity you need to work confidently at component level.

Ready to add micro-scale thermal imaging to your toolkit? Add to cart now, or contact our team if you’d like advice on the best thermal inspection setup for your application.