YOKOGAWA CW10 True-Rms Clamp-On Power Meter

Yokogawa CW10 Features:

• AC/DC Power up to 600kW, AC/DC Voltage to 1000V, AC/DC Current to 600 Amps.
• True RMS for AC measurements.
• Harmonics 1st up to 25th order.
• Power fluctuation using the ACA Inrush and Peak Hold functions.
• Frequency, Resistance, Continuity, Diode Check, and Power Factor measurements.
• Display reading up to 9999 counts.
• Jaw opening 45mm max. (measurable conductor diameter 37mm).
• CAT IV 600V and CAT III 1000V compliant for safety.
• Backlight on the display area turns on and a white LED automatically illuminates the front of jaw when clamping.
• Non-contact Voltage detection (Red LED lights uo on detection).
• Easy Operation with the navigation key.
• Low Pass Filter, Phase Detection, AC/DC Auto Sense.

Instrument Supplied With:

• Test lead set (red and black).
• 9 volt alkaline battery (6LR61).
• Carrying case.
• User’s Manual.

Yokogawa CW10 Specifications: Display Count 9999 /6000 Measuring Rate 3 times/second Over Range Indicator “OL” or (“-OL”) Auto Power Off approx. 15 minutes Low Battery Indicator Yes (four steps) Power Supply 1 x 9 Volt type 6LR61 Alkaline battery. Battery Life approx. 20 hours (using alkaline battery, with backlight off) Operating Temperature 0°C to 50°C (with no condensation) Relative Humidity ≤ 80% RH (0°C to 30°C) ≤ 75% RH (30°C to 40°C) ≤ 45% RH (40°C to 50°C) Storage Temperature -10°C to 50°C, 80% RH or less (with battery removed) Temperature Coefficient at 0°C to 18°C and 28°C to 50°C add 23 ± 5°C accuracy x 0.2/°C Withstand Voltage AC 6800V rms 5 sec. (between the core and the base) AC 4300V rms 5 sec. (between the core and the voltage input terminals) AC 6800V rms 5 sec. (between the voltage input terminals and the case) Insulation Resistance 100MΩ or greater at 1000V DC (between the core and the case, the core and the voltage input terminals and the voltage input terminals and the case) Safety Standards EN 61010-1, EN 61010-2-032 1000V CAT III, 600V CAT IV Test Leads EN 61010-031 Pollution Degree 2 (indoor use) EMC Standards EN 61326-1, EN61326-2-1, EN 61326-2-2, EN 55011 General Specifications Dimensions 242mm (L) x 87.5mm (W) x 51mm (D) Weight Approx 435g (including battery) Ordering Information Yokogawa CW10 True-Rms Clamp-On Power Meter Includes: Test Lead set, 9-Volt Battery (installed), Carrying case, and User’s manual