Tenmars TM-101 Sound Level Meter

AUD $310.00 .( AUD $341.00 inc. GST )


For all your equipment calibration needs, visit our MyCalibration website.


Free Delivery on orders over $1000
Shipping time may vary for certain products*

Product Enquiry

If you would like more information regarding this product, simply email us here.

  • Drop files here or
    Accepted file types: jpg, gif, png, pdf, Max. file size: 1 MB, Max. files: 4.
    • This field is for validation purposes and should be left unchanged.

    The Tenmars TM-101 Sound Level Meter conforms to IEC 61672 Type II

    Tenmars TM-101 Features:

    • 3-1/2 digit LCD display with maximum reading of 2000.
    • Test Ranges: 30dB to 130dB,
      •  LO 30dB to 80dB,
      •  MED 50dB to 100dB,
      •  HI 80dB to 130dB.
    • Accuracy: ±1.5dB (ref 94dB) at 1kHz.
    • Resolution: 0.1dB.
    • Microphone: 1/2 Electret condenser microphone.
    • Frequency Weighting: A and C.
    • Time Weighting: FAST, SLOW.
    • Autoranging, Auto Power Off, Data Hold, and Min/Max functions.
    • Dynamic Range: 50dB.
    • Frequency Range: 31.5Hz to 8kHz.
    • AC/DC output signal for use with data-loggers.
    • Warranty: 2-years

    Authorised Australian Distributor

    WARRANTY 3

    Categories: , Tag:

    Using the Tenmars TM-101 Sound Level Meter

    (1) Battery Loading Remove the battery cover on the back and put in one 9V Battery.

    (2) Battery Replacement When the battery voltage drops below the operating voltage, mark appears . lf it appears , battery should be replaced with new one.

    (3) AC Adapter Connection When the AC adapter is used, insert the plug of the adapter into the DC9V connector on the side panel.

    1 .Wind is blowing across the microphone would bring additional extraneous noise. Once using the instrument in the presence of wind, it is necessary to mount the windscreen to filte the undesirable signals.

    2.Calibrate the instrument before operation if the instrument was not in use for a long time or operation at bad environment.

    3.Do not store or operate the instrument at high temperature and high humidity environment.

    4.Keep microphone dry and avoid severe vibration.

    5.Please take out the battery and keep the instrument in low humidity environment.

    When not in use.

    11 12 1.Open battery cover and install a 9 Volt battery in battery compartment.

    2.Turn on power and select the desired response Time and weighting. lf the sound source consists of short bursts or only catching sound peak, set response to FAST. To measure average sound level, use the slow setting. Select A weighting for general noise sound level and C weighting for measuring sound level of acoustic material.

    3.Select the desired Level

    4.Hold the instrument comfortably in hand or fix on tripod and point the microphone at the suspected noise source, the sound pressure level will be displayed.

    5.When MAX/ MIN (maximum, minimum hold) mode is chosen. The instrument captures and holds the maximum and minimum noise level for a long period using any of the time weighting and ranges. Press the MAX/ MIN button 2 seconds to clear the MAX/MlN Reading. ‘ MAX’ or”MlN” symbol disappears.

    6.Turn OFF the instrument and remove battery when not in use

    Tenmars TM-101 Sound Level Meter Specifications

    Display 3-1/2 digit LCD display
    Test Range 30dB to 130dB
    30db to 80dB (LO)
    50dB to 100dB (MED)
    80dB to 130dB (HI)
    Accuracy ±1.5dB (ref 94dB at 1kHz)
    Resolution 0.1dB
    Microphone 1/2-inch Electret condenser microphone
    Frequency Weighting A, and C
    Time Weighting Fast, and Slow
    Dynamic Range 50dB
    Frequency Range 31.5Hz to 8000Hz
    General Specifications
    Dimensions 280mm (L) x 80mm (W) x 32mm (D)
    Weight approx. 500g (including batteries)
    Ordering Information
    Model Name Description
    Tenmars TM-101 Sound Level Meter
    Included accessories: Battery, and Owner’s manual
    Weight .5 kg

    Reviews

    There are no reviews yet

    Be the first to review “Tenmars TM-101 Sound Level Meter”

    You may also like…

    AUD $995.00 .( AUD $1,094.50 inc. GST )
    AUD $420.00 .( AUD $462.00 inc. GST )
    AUD $295.00 .( AUD $324.50 inc. GST )

    Environmental Testers

    TENMARS TM-102 Sound Level Meter

    AUD $290.00 .( AUD $319.00 inc. GST )

    Need help? Call our support team 1800 358 531

    • Place The Order and Earn Points Earn 10 Points on every AUD $100.00 spent
    • Write Review
      Write reviews and earn 300 Point
    • image
      Apply Points on Cart Total

      Conversion Rule : AUD $10.00 = 500 Point

    Check your point total now Check your point total now