HT Italia HT9014 AC true RMS Clamp Meter CAT IV 600V

AUD $205.00 .( AUD $225.50 inc. GST )


For all your equipment calibration needs, visit our MyCalibration website.


Free Delivery on orders over $1000
Shipping time may vary for certain products*

Product Enquiry

If you would like more information regarding this product, simply email us here.

  • Drop files here or
    Accepted file types: jpg, gif, png, pdf, Max. file size: 1 MB, Max. files: 4.
    • This field is for validation purposes and should be left unchanged.

     

    The HT Italia HT9014 clamp is designed for AC TRMS current measurement up to 600A, and AC/DC voltage to achieve safety CAT IV 1000V according to IEC/EN61010-1 safety standard. The HT Italia HT9014 has a large LCD 4 digit display (6000counts), with back light and bargraph for ease of reading in critical environments. The HT Italia HT9014 also performs resistance, continuity test, frequency, capacitance, diode test, duty cycle and temperature with type K probe measurements. The Auto PowerOFF feature is also available for the meter in order to preserve it’s internal battery charge.

    Features:

    • TRMS measurement
    • AC current up to 600A
    • AC/DC voltage up to 1000V
    • “Voltsense” feature for AC voltage detection
    • Resistance
    • Continuity test with buzzer
    • Frequency with jaws and test leads
    • Capacitance
    • Diode test
    • Duty Cycle
    • Temperature with type K probe
    • Autorange
    • Data HOLD
    • MAX/MIN/ZERO
    • PEAK CURRENT (<10ms)
    • Backlight
    • Bargraph
    • Auto PowerOFF

     

    HT Italia HT9014 clamp meter has been designed to measure AC current up to 600A and AC/DC voltage up to 1000V TRMS to reach CAT IV 600V and CAT III 1000V in compliance with standard IEC/ EN61010-1.

    The clamp is provided with a wide backlit display with 6000 measuring spots and an auto power off function to preserve its battery.

    HT Italia HT9014 Technical Specifications
    ELECTRICAL SPECIFICATIONS
    DC Voltage (Autorange) Range 600.0mV – 1000V
    AC Voltage (Autorange) Range 6.000V – 1000V
    HT Italia HT9014 GENERAL SPECIFICATIONS
    Mechanical characteristics
    Size 215(L) x 74(La) x 43(H)mm
    Weight (including battery) 285g
    Max conductor size 30mm
    Supply
    Battery type 1 battery 9V NEDA 1604 IEC 6F22 JIS 006P.
    Battery life about 200 hours.
    Auto power OFF about 15 minutes of idleness
    Display
    Characteristics 4 LCD (max 6000 counts), decimal point, unit symbol indication, bar graph and backlight
    Sample rate 2 times/sec
    Conversion mode TRMS
    Climatic conditions
    Reference temperature 18°C ± 28°C
    Operating temperature 5 ÷ 40 °C
    Operating humidity <80%RH
    Storage temperature -20 ÷ 60 °C
    Storage humidity <80%RH
    Reference Standards
    Comply with IEC/EN 61010-1
    Insulation double insulation
    Pollution Level 2
    For inside use, max height 2000m
    Installation category CAT IV 600V, CAT III 1000V to ground

    This HT Italia HT9014 has been designed for use in an environment of pollution degree 2. Indoor use. • It measures CURRENT and VOLTAGE on CAT IV 600V and CAT III 1000V plants. For measurement categories please see § 1.4. • You must comply with the usual safety regulations aimed at protecting you against the dangerous electric current and protecting the instrument against an incorrect operation. • Only the leads supplied with the instrument guarantee compliance with the safety standards. They must be in good conditions and they must be replaced, if necessary, with an identical model. • Do not test or connect to any circuit whose voltage or current exceeds the specified overload protection. • Make sure that the batteries are installed correctly. • Before connecting the test probes to the installation, check that the function selector is positioned on the required measurement. • Make sure that the LCD and the range indicator show the same as the function desired

    Weight 0.25 kg

    Reviews

    There are no reviews yet

    Be the first to review “HT Italia HT9014 AC true RMS Clamp Meter CAT IV 600V”

    Need help? Call our support team 1800 358 531

    • Place The Order and Earn Points Earn 10 Points on every AUD $100.00 spent
    • Write Review
      Write reviews and earn 300 Point
    • image
      Apply Points on Cart Total

      Conversion Rule : AUD $10.00 = 500 Point

    Check your point total now Check your point total now