FLUKE Networks IntelliTone Pro 200 LAN Tester, Toner, Tracer & Probe
The first network cable toner and probe to offer digital and analogue signaling all in one network toner and probe. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analogue mode to isolate individual wire pairs and trace voice, audio and video cabling.
IntelliTone digital toning technology:
- Ends network cable location confusion, decisively rejects noise and false signals
- Network cable tracer locates cables on active networks, even when terminated at a switch
- Isolates cable and wiring within a bundle, despite cable bleed
- Confirms cable location, verifies cable continuity, and detects cable faults (opens, shorts, and reversed pairs) in one step
- Signal strength indicator LEDs so you can help identify one cable that is bundled with other cables
- Probe has built-in pair tester to identify open, shorted and crossed pairs
SmartTone analogue toning technology:
- Isolates individual wire pairs precisely by changing tone when shorted
- Effectively traces and locates voice, audio, and video cabling
General specifications |
|
Operating temperature | 0 °C to 40 °C |
Storage temperature | -20 °C to °C |
Operating relative humidity (% RH without condensation) | 95 % (10 °C to 35 °C) 75 % (35 °C to 40 °C) Uncontrolled < 10 °C |
Vibration | Random, 2 g, 5 Hz-500 Hz |
Shock | 1 m drop test |
Safety | EN 61010-1, Category: None |
Altitude | 3000 m |
EMC | EN 61326-1, FCC Part 15 B |
Battery type and life | 9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical |
Applications | Copper cabling media including; 75 or 50 Ohm Coaxial cable; Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. UTP cable. Shielded Twisted Pair supported in Cable Map function of the IntelliTone 200. |
Toner specifications |
|
Dimensions | 14.1 cm x 7.5 cm x 3.2 cm |
Display | LED |
Control | Thumbwheel switch |
Toner interface | Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) – two conductor wiring |
Toner frequency | IntelliTone™ signal: encoded digital signal Analogue SmartTone signal: 500 – 1200Hz, 4 songs |
Ouptut power | 5 V p-p |
Auto power down | Turns off automatically after 2 1/2 hours of inactivity |
Probe specifications |
|
Dimensions | 22.2 cm x 4.8 cm x 3.2 cm |
Display | (8) LED indicators, Sync LED indicator |
Audio | IntelliTone: Microprocessor controlled audio files Analogue: Detected toner signal |
Control | Thumbwheel switch, volume control wheel |
Tone detection | Detects IntelliTone™ digital signal for Locate, Isolate, and Cable Map Detects analogue SmartTone signal (500-1200Hz) and other analogue toners. |
Toner interface | Main Mod8 port for Cable Map on all 4 pairs of UTP / STP cabling. |
Auto power down | Turns off automatically after 1 hour of inactivity |
Neil G. (verified owner) –
A pleasure to deal with. Equipment was in stock and delivered in a timely manner. AAA+