FLUKE i3000S-24 Flex AC 3000A Current Clamp

AUD $1,170.00 .( AUD $1,287.00 inc. GST )


For all your equipment calibration needs, visit our MyCalibration website.


Free Delivery on orders over $1000
Shipping time may vary for certain products*

Product Enquiry

If you would like more information regarding this product, simply email us here.

  • Drop files here or
    Accepted file types: jpg, gif, png, pdf, Max. file size: 1 MB, Max. files: 4.
    • This field is for validation purposes and should be left unchanged.

    The Fluke i3000s 24 Flex AC Current Probe can be used with oscilloscopes, digital multimeters, recorders or data loggers to measure AC current up to 3000 A.
    The flexible measuring head allows current measurements on conductors that are hard to reach or inaccessible using typical clamp-on current probes.

    FLUKE i3000S Flex Features

    •  AC RMS current ranges with ±1% accuracy

    1 to 30A (100mV/A output)

    1 to 300A (10mV/A output)

    1 to 3000A (1mV/A output)

    •  to 50kHz frequency

    •  100KΩ minimum load impedance

    •  CAT III 600V safety rating

    Categories: , Tag:

    The Fluke i3000s-24 Flex is an ac current clamp utilizing the Rogowski principle. It can be used to measure currents from 3 to 3000 AC when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick  and easy installation in hard to reach areas.

    The i3000s Flexprovide a low voltage 3 V AC  output that is proportional to the current being measured. The Probes provide full-scale direct readings for 30 A, 300 A, and 3000 A.

    Fluke i3000s Flex  Electrical Specifications

    Current ranges 30 A
    300 A
    3000 A
    AC rms
    Output sensitivity (AC-coupled) 100 mV
    10 m
    1 mV per A
    Load impedance 100 kΩ minimum
    Accuracy at +25°C
    ±1% of range (45 Hz to 65 Hz)
    Linearity 10% to 100% of range
    ±0.2% of reading
    Noise 8 mV AC rms (30 A)
    2 mV AC rms (300 A, 3000 A)
    Frequency range 10 Hz to 50 kHz (-3 dB)
    Phase error < ±1° (45 Hz to 65 Hz)
    ±10° (at 20 kHz)
    Position sensitivity with cable > 25 mm from the coupling
    ±2% of range
    External field with cable > 200 mm from the head
    ±1% of range
    Power supply 2 x AA/MN 1500/LR6 Alkaline, 400 hours, low battery indicator or dedicated external power supply
    Temperature coefficient ±0.08% of reading per °C
    Working voltage see safety standards section
    600 V AC rms or DC
    General Specifications
    Head circumference 610 mm
    Head cable diameter 14.3 mm
    Head bend radius 38.1 mm
    Cable length (head to electronics) 2 m
    Output connection 0.5 m cable terminated with safety BNC connector. Supplied with 4mm safety plug adapter
    Operating temperature range -20°C to +90°C (-4°F to 190°F) (head)
    -20°C to +85°C (-4°F to 185°F) (electronics)
    Strong temperature range -40°C to +105°C (-40°F to 221°F) (head)
    -20°C to +85°C (-4°F to 185°F) (electronics)
    Operating humidity 15% to 85% (non-condensing)
    Weight 180 g  (head)
    190 g (electronics)
    Safety standards BS EN 61010-1: 2001
    BS EN 61010-2-032: 2002
    BS EN 61010-031: 2002
    600 Vrms, Category III, Pollution Degree 2
    Use of the probe on uninsulated conductors is limited to 600 V AC rms or DC and frequencies below 1 kHz
    EMC standards EN 61326: 1998 +A1, A2, and A3
    Head cable length (double insulated) 610 mm

     

    Weight 1 kg

    Reviews

    There are no reviews yet

    Be the first to review “FLUKE i3000S-24 Flex AC 3000A Current Clamp”

    Need help? Call our support team 1800 358 531

    • Place The Order and Earn Points Earn 10 Points on every AUD $100.00 spent
    • Write Review
      Write reviews and earn 300 Point
    • image
      Apply Points on Cart Total

      Conversion Rule : AUD $10.00 = 500 Point

    Check your point total now Check your point total now