Fluke 773 Milliamp Process Clamp Meter

AUD $2,395.00 .( AUD $2,634.50 inc. GST )


For all your equipment calibration needs, visit our MyCalibration website.


Free Delivery on orders over $1000
Shipping time may vary for certain products*

Product Enquiry

If you would like more information regarding this product, simply email us here.

  • Drop files here or
    Accepted file types: jpg, gif, png, pdf, Max. file size: 1 MB, Max. files: 4.
    • This field is for validation purposes and should be left unchanged.

    Fluke Fluke 773 Milliamp Process Clamp Meter can measure mA signals without breaking the loop. The Fluke 773 Milliamp Process Clamp provides you with the best in troubleshooting and process calibration power.

    SKU: FLUKE 773 Categories: , , Tag:

    The Fluke 773 mA Clamp MetersĀ is designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

    Fluke 773 Features
    • Best in class 0.2 % accuracy
    • 0.01 mA resolution and sensitivity
    • Measure 4 to 20 mA signals without ā€breaking the loopā€
    • Measure mA signals for PLC and control system analog I/O
    • Dual backlit display with both mA measurement and percent of 4 to 20 mA span
    • Measurement Spotlight illuminates hard to see wires in dark enclosures
    • Detachable clamp with extension cable for measurements in tight locations
    • Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
    • Automatically change the 4 to 20 mA output for remote testing
    • Power saving features, auto-off, backlight timeout extend battery life
    • Hold function captures and displays changing measurements
    • Measure 4 to 20 mA signals with in-circuit measurement
    • Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
    • Source 4 to 20 mA signals for testing control system I/O or I/Ps
    • mA output linear ramp or 25% step output
    • DC voltage measurement to verify 24V power supplies or voltage I/O signals
    • Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals
    • Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
    • mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
    • Voltage output linear ramp or 25% step output
    Each Fluke 773 Includes
    • Four AA alkaline batteries (installed)
    • Soft carrying case
    • TL75 test leads
    • AC 72 detachable clip
    • TL 940 mini hook test leads
    • Instruction sheet
    • Hanging tool with hook and loop strap
    Specifications
    Diameter of measurable conductor 4.5 mm max
    Operating temperature -10 to 50ĀŗC
    Storage temperature -25 to 60ĀŗC
    Operating humidity < 90% @ <30ĀŗC, < 75% @ 30 to 55ĀŗC
    Operating altitude 0 to 2000 m
    IP rating IP 40
    Size 44 x 70 x 246 mm
    Weight 410 g
    Vibration Random 2 g, 5 to 500 Hz
    Shock 1 meter drop test (except the jaw)
    EMI/RFI Meets EN61326-1
    For current measurement w/ JAW, add 1mA to specification for EMC field strengths of 1V/m up to 3V/m.
    Temperature coefficient 0.01% ĀŗC
    (< 18ĀŗC or > 28ĀŗC)
    Power, battery life (4) AA 1.5 V Alkaline, IEC LR6, 12 hours in mA source into 500 ohms
    Warranty Three years for electronics
    One year for cable and clamp assembly
    Functional Specifications
    mA measurement Resolution / range 0 to 20.99 mA
    (measured by clamp) Accuracy 0.2% + 2 counts
    Resolution / range 21.0mA to 100.0 mA
    Accuracy 1% + 5 counts
    mA measurement (measured in series with test jacks) Resolution / range 0 to 24.00 mA
    Accuracy 0.2% + 2 counts
    mA source (maximum mA drive: 24 mA into 1,000 ohms) Resolution / range 0 to 24.00 mA
    Accuracy 0.2% + 2 counts
    mA simulate (maximum voltage 50 V dc) Resolution / range 0 to 24.00 mA
    Accuracy 0.2% + 2 counts
    Voltage source (2 mA maximum drive current) Resolution / range 0 to 10.00 V DC
    Accuracy 0.2% + 2 counts
    Voltage measure Resolution / range 0 to 30.00 V DC
    Accuracy 0.2% + 2 counts

    Reviews

    There are no reviews yet

    Be the first to review “Fluke 773 Milliamp Process Clamp Meter”

    You may also like…

    AUD $1,700.00 .( AUD $1,870.00 inc. GST )
    AUD $690.00 .( AUD $759.00 inc. GST )

    Need help? Call our support team 1800 358 531

    • Place The Order and Earn Points Earn 10 Points on every AUD $100.00 spent
    • Write Review
      Write reviews and earn 300 Point
    • image
      Apply Points on Cart Total

      Conversion Rule : AUD $10.00 = 500 Point

    Check your point total now Check your point total now